JUS standardizacija

Section 4.2 Guidance on the application of the tests of BS 2011 to simulate the effects of storage. — p 6 UDC 621.3.002.6.001.4

BS 2474:1983 Names for chemicals used in industry. — p 32 UDC 001.4:661

BS 2690:Part 101:1984

\WWater used in industry

Part i01. Dissolved oxygen. Methods of testing. — p 9 UDC 628.1:663.63.01

BS 2690:Part 109:1984

Water used in industry

Part 109. Alkalinity, acidity, pH value and carbon dioxide. — p 7

UDC 628.1:663.63.01

BS 2782:Part 3:Method 350:1984

ISO 180—1982

Plastics |

Part 3. Mechanical properties

Method 350. Determination of Izod impact strength of rigid materials. — p 10

UDC 678.5./.8:678.01

BS 2782:Part 3:Method 359:1984

ISO 179—1982

Plastics

Part 3. Mechanical properties

Method 359. Determination of Charpy impact strength of rigid materials (Charpy impact flexural test). — p 11

UDC 678.5/8

BS 3384:1984 Dental gold solders. — p 3 UDC 616.314—089.27/.28

BS 3406:Part 2:1984

Deterrnination of particle size distribution

Part 2. Recommendations for gravitational liquid sedimantation methods for powders and suspensions. — p 35

UDC 620.168.36:621.2

BS 3424:Part 9:1984

Testing coated fabrics

Part 9. Methods 11A, 11B, 11C and 11D. Methods for determination of resistance to damage by flexing. — p 13 UDC 677.077.652

BS 3531:Part 14:1984 Surgical implants

240

Part 14. Specification for medullary pins (Ruch type) and introducer/extractors. — p 3 UDC 615.461:616.71

BS 3597:1984 Electroplated coatings of 65/35 tin/nickel alloy. — p 6 UDC 669.058.7

BS 3631:1984

ISO 2144—1983

Determination of ash of paper and board. — p 3 UDC 676.2.014.2:543

BS 4300:Part 16:1984

Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series)

Part 16. Specification for sheet and strip in 8011 material. — p 7

UDC 669.71—13+669.715—41

BS 4876:1984

Peformance requirements for domestic flued oil burning appliances (including test procedures). — p 80

UDC 697.241

BS 4999:Part 71:1984

General requirements for rotating electrical: machines Part 71. Winding terminations. — p 3

UDC 621.313—13

BS 5135:1984

Process of arc welding of carbon and carbon manganese steels. — p 47

UDC 621.791.75

BS 5145:1984 Lined industrial vulcanized rubber boots. — p 8 UDC 685.315.41

BS 5350:Part B9:1984

Adhesives

Part B9. Determination fo resistance to sagging (flow after application). ~— p 7

Part H3. Determination of heat resistance of hot-melt adhesives. — p 3

Part H4. Determination of maximun open time of hotmelt adhesives (oven method). — p 5

UDC 665.93:620.193.91

BS 5380:1984

Hydraulic port and stud coupling using O-ring sealing and G series fastening threads. — p 4

UDC 621.643.414.06—578.4